Table of Contents
Advertisement
Use the following procedure to invoke manual address information programming.
1. When you select ADDR from the Admin Procedure Screen, the Static Addressing Local
Procedure screen displays as follows with the prompt "Select address to change.":
Static Addressing screen
Use DHCP
Phone
Router
Mask
HTTPS File Server
HTTP File Server
DNS Server
802.1Q
VLAN ID
VLANTEST
where:
nnn.nnn.nnn.nnn is the current IP Address associated with the specific address
●
information to its left, which could be either a value previously set by a technician, or the
original IP Address value if no previous change was made,
dddd is the current value of L2QVLAN and ddd is the current value of VLANTEST,
●
respectively.
2. Use the navigation arrows to scroll to and highlight the address you want to change, then
use the appropriate softkey(s) and the dialpad to change the value as described in Step 3.
3. Depending on the item you selected, choose one of the following:
If you want to
Change any of the IP
Address values (File,
Phone, Router,
Subnet Mask, &/or
DNS Server)
Change the VLAN ID
value
Change the
VLANTEST value
Yes
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
0=auto, 1=on, 2=off
dddd
ddd
Then
Use the dialpad to enter the new IP Address. IP Addresses have
three sets of three digits followed by a period. Pressing *
following entry of three digits causes a period to be placed in the
next position, and the cursor to advance one position to the right.
For example, to enter the IP Address 111.222.333.444, press the
1 on the dialpad three times then press *, press the 2 on the
dialpad three times then press *, press the 3 on the dialpad three
times then press *, then press the 4 on the dialpad three times.
Proceed to the next step.
Use the dialpad to enter the new static VLAN ID of from 0 to
4094, inclusive. Proceed to the next step.
Use the dialpad to enter the new value of the DHCPOFFER wait
period of from 0 to 999, inclusive. Proceed to the next step.
Static Addressing Installation
Line Description and
(Configuration Parameter Value)
Yes or No (USE_DHCP)
Telephone IP Address (IPADD)
Router in use; gateway/router IP
Address(es) (ROUTER)
IP network mask (NETMASK)
IP Address of HTTPS File Server
(TLSSRVR)
IP Address of the HTTP File Server
(HTTPSSRVR)
DNS server IP Address(es)
(DNSSRVR)
(L2Q)
(L2QVLAN)
Number of seconds to wait for a
DHCP offer (VLANTEST)
Issue 2 December 2007
33
Advertisement
Table of Contents
