Engaging The Ec500 Timer When Ec500 Is Currently Disabled - Avaya

EC500 User Manual

Using the EC500 timer feature
2. To manually shut down the EC500 timer, do one of the following:
Engaging the EC500 timer when EC500
is currently disabled
If EC500 is currently disabled, the lamp corresponding to the administered feature
button is off. To engage the EC500 timer when EC500 is currently disabled:
1. On your office telephone, press the EC500 feature button twice.
2. To manually shut down the EC500 timer, do one of the following:
Press the EC500 feature button once to shut down the timer and
leave EC500 disabled.
Press the EC500 feature button twice to shut down the timer and
re-enable EC500.
Enter the EC500 "enable" or "disable" feature access code on your
telephone keypad.
The lamp displays a green inverted wink (250 ms on, 750 ms off).
The message EC500 Timer Enabled appears for two seconds on
your telephone display.
Press the EC500 feature button once to shut down the timer and
leave EC500 disabled.
Press the EC500 feature button twice to shut down the timer and
re-enable EC500.
Enter the EC500 "enable" or "disable" feature access code on your
telephone keypad.
35
Issue 4 May 2003