Set Administration - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
administer the Direct Inward Dialing (DID) service
set and view the All Lines Busy Event
For instructions on how to install and use PARTNER ACS R7.0 PC Administration, see the
®
PARTNER ACS R7.0 PC Administration Getting Started.
If your PARTNER system has a T1 module, you must use the PARTNER ACS R7.0 PC
Administration software to program and administer the T1 module. You cannot program a
T1 module via Set administration.
If you have a T1 module, go to
start configuring your PARTNER system.

Set Administration

Set Administration enables you to program and administer the features for a PARTNER system
from a system display telephone at extension 10 or extension 11. However, you cannot program
the settings for T1 lines via Set Administration.
The remainder of this guide describes how to program and administer a PARTNER system via Set
Administration.
Programming a PARTNER System
3-2
"Configuring the T1 Module" on page 3-9 for instructions on how to
3