Chapter 5: Initial Administration; Configuring The Settings File; Configuration Of Initial Parameters - Avaya H100- Series Installing And Maintaining

Chapter 5: Initial administration

Configuring the settings file

About this task
Modify the settings file with appropriate values to provision the device configuration parameters.
Procedure
1. On the file server, go to the location where you downloaded the settings file.
2. Open the settings file in a text editor.
3. Set the required parameters.
4. Save the settings file.
Related links

Configuration of initial parameters

Supported countries
IP Office parameters checklist
Configuration of initial parameters
Set the following initial parameters in the settings file. For more information and a complete list of
the settings file parameters, see Administering Avaya H100-Series Video Collaboration Stations.
Wireless handset
Set the following parameter for the wireless handset.
Parameter
COUNTRY
DECTSTAT
April 2016
on page 39
on page 43
on page 49
Type Default Description
value
String Null Specifies the country of operation for specific dial tone
generation, Wi-Fi, DECT, and the default anti flickering
frequency for camera – 50 Hz or 60 Hz.
Integer 1 Specifies whether the DECT menu option in the Setting app is
enabled for the user. Assign one of the following values:
• 0: The DECT handset and menu option is disabled in the
Installing and Maintaining Avaya H100-Series Video Collaboration Stations
Comments on this document? infodev@avaya.com
Settings app and the user cannot change it.
Table continues...
39