Table of Contents
Advertisement
C. AUDIBLE AND VISUAL ALARM STATUS INDICATOR
1. 1 CHIRP (VEHICLE HORN OR SIREN) WITH 1 LIGHT FLASH = Alarm is armed.
2. 2 CHIRPS (VEHICLE HORN OR SIREN) WITH 2 LIGHT FLASHES = Alarm is disarmed.
3. 4 CHIRPS (VEHICLE HORN OR SIREN) WITH 4 LIGHT FLASHES AND LED FLASHING
IN A 2 FLASH/HOLD SEQUENCE = Alarm is disarmed and has been breached in your absence.
D. VALET/OVERRIDE SWITCH
NOTE: Both the VALET and OVERRIDE functions are performed from the same switch.
1. OVERRIDE FUNCTION
The OVERRIDE FUNCTION may be used if the RF-503 remote is lost or inoperative. To operate
the OVERRIDE FUNCTION, enter the vehicle (alarm will sound). Switch the ignition to ON. Move
the VALET/OVERRIDE switch to ON, then OFF. The alarm will stop. The RF-503 will be
disarmed. Quickly replace or service the remote transmitter to insure continued vehicle protection.
2. VALET FUNCTION
If PASSIVE (Automatic) arming is selected, the RF-503 may be placed into the VALET (stand-by)
mode to allow for vehicle service, washing, or attendant parking without self-arming after the ignition has
been switch off, and without leaving the RF-503 remote control with unauthorized individuals.
To operate the VALET FUNCTION, turn the vehicle ignition to ON and move the
VALET/OVERRIDE switch to ON, then ignition OFF.
To return to normal operation, turn the vehicle ignition to ON and move the VALET/OVERRIDE
switch to OFF, then ignition OFF.
3. KEYLESS ENTRY MODE
In the valet mode, the vehicle doors can be locked and unlocked using the remote if the remote door
lock/unlock (*) has been installed. However, there will be no chirp confirmation. It is strongly
recommended that the driver visually confirm that the doors are locked or unlocked.
NOTE (*): Your vehicle must be equipped with power door locks. Optional relays my be required.
5
Advertisement
Table of Contents
