Horizon Fitness ELITE 1.1T User Manual page 12

LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill where you intend
to use it, raise or lower the adjustable levelers located on the treadmill base frame. Once you have
leveled the treadmill, lock the levelers in place by tightening the nuts against the frame. To assure
the treadmill is level, a carpenter's level is recommended. Note: 1.1T leveling not needed.
TURN POWER ON
Make sure that your treadmill is properly connected to a power outlet. The on/off switch is located next to
the power cord. Flip this switch to the 'on' position, so that the switch is lit. You will hear a beep and the
console will light up.
SAFETY KEY
Your treadmill will not start unless the safety key is placed on the safety key holder. Attach the clip
end securely to your clothing. This safety key is designed to cut the power to the treadmill if you
should fall. NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT COME OFF
YOUR CLOTHING.
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt. Place your feet on the side
rails before starting the treadmill. Start walking on the belt only after the belt has begun to move.
Never start the treadmill at a fast running speed and attempt to jump on!
12