ATEN ALTUSEN PN0108 User Manual page 62

PN0108 User Manual
NT:
1. Go to the Control Panel; open the UPS entry. A dialog box similar to the
one below appears:
a) For the COM port entry, select the COM port on the computer that the
Safe Shutdown Cable is plugged into.
b) Match the other options to the values shown in the figure above.
2. Click OK to finish
To check that the setup is working:
1. Navigate through the following folders: Control Panel → Administrative
Tools → Services.
2. In Services, scroll down until you see the Uninterruptible Power Supply
entry with Started for its status, as shown in the figure below:
52