ATEN ALTUSEN PN0108 User Manual page 51

Outlet Groups:
Outlet groups allow power control actions to be carried out on the entire group
at the same time, rather than repeatedly performing the same action on each
individual outlet. You can have four outlet groups per station, and each group
can be given a distinctive name. The maximum number of characters for the
name is 15.
The bottom Configuration panel lets you select the outlets that you want to put
together as an outlet group.
To set up an Outlet Group, give it a Name, then put a check in the boxes of the
outlets you want in the group.
Note: Outlets can belong to more than one group. For example, Group 1 can
consist of outlets A, B, C, and D, while Group 2 consists of outlets B,
D, E, G, and H.
Finishing Up
When you have finished making your settings selections, click Save to
save your changes.
To leave this screen after you have saved your changes, click on another
button in the Device Control List.
To abandon any changes and keep the original settings, click on another
button in the Device Control List without saving this screen.
Chapter 5. Administration
41