Table of Contents
Advertisement
LED
Color
LINK
Green
ACT
Yellow
2.2 ENW-9606 Installation
Step 1: Turn off the PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty, non-shared bus mastering PCI slot and remove the corresponding back
plate. Save the screw for use in Step 6.
Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to
ensure it is fully seated in the slot.
Step 6: Secure the adapter with the screw you saved in step 4.
Step 7: Replace the PC cover.
Step 8: Power on the PC and refer to next chapter to install the driver of this adapter.
Note:
Please do not install the ENW-9606 in a shared PCI slot. Avoid any PCI slot next to an
ISA slot because this is often a shared slot and does not support bus mastering.
Description
Lights to indicate a functional network link through the port.
Blinks to indicate data has been sending and receiving via the port.
Table 2-1 Functions and State of the LEDs
3
Advertisement
Table of Contents
