Installing The Enw-3502-Fc - Planet ENW-3502-FC User Manual

PLANETlENW-350-FC
(2) LNK LED and 10/100 LED
This two LEDs can monitor the link status of the card's
connection. The LNK LED is orange in color, and the
10/100 LED is green colored. The following table shows the
meaning of the two LEDs:
LNK LED
off
on
on
off
(3) FULL LED:
This LED can monitor the link status of the card's
connection. It is red colored. This LED lights up to indicate
that the connection is in Full-duplex mode.

2.3 Installing the ENW-3502-FC

Follow the procedure below to install the PLANET ENW-3502-FC.
1. Turn off the host computer.
2. With the card' s 68-pin connector facing the PCMCIA CardBus slot,
slide the card all the way into the PCMCIA CardBus slot as
illustrated in Figure 2-3.1.
Do not force the connection.
6
10/100 LED
off
off
on
on
Description
No any valid connection
10Base-T link is established
100Base-TX link is established
Invalid