Table of Contents
Advertisement
A device driver must be installed before your ENW-9606 can be used with your computer. This chapter
describes how to install the driver for various operating systems. Before you begin the driver installation
process, make sure you have the installation disks for your computer's operation system nearby.
3.1 Installing Driver To Windows 2000
Make sure the ENW-9606 has been successfully installed in your computer before you start to install
the driver. If this is the first time you are installing the ENW-9606 into your computer, Window will
automatically detect it and updates the hardware information database. To install the driver provided,
follow these steps:
Note: The following installation operates under Window 2000. Procedures will be similar to
Window 98/Me. About Windows XP driver installation, please refer to next section.
1.
Install ENW-9606 into your PC's PCI slot.
2.
Power on the PC and insert Driver Disk into CD-ROM drive.
3.
Windows will automatically detect ENW-9606 and ask the user to install driver. Please click
"Next".
Please select the first option and click "Next" to continue.
4.
Select "Specify a location" and click "Next".
5.
Chapter 3 Driver Installation
4
Advertisement
Table of Contents
