Table of Contents
Advertisement
4.1 Cable Specifications
Ethernet Type
10BASE-T
100BASE-TX
1000BASE-T
Caution: Please do not use telephone cables. Telephone cables do not support Ethernet or Fast
Ethernet.
There are two types of cables: Straight Through Cables and Crossover Cables. Category 5 UTP/STP
cable has eight wires inside the sheath. The wires form four pairs. Straight Through Cables has same
pin-out at both ends while Crossover Cables has a different pin arrangement at each end.
4.2 Technical Specifications
Standards
Protocol
Connectors
Bus Type
LEDs
Maximum Segment Length 100M (328 ft) over Category 5 twisted-pair cable
Cabling Requirements
Speed
4.3 Environmental Information
Dimensions
Weight
Operating temperature
Storage temperature
Operating humidity
Storage humidity
4.4 Standard Conformance
EMC Certification
Cable Requirements
Category 3 or better, UTP or STP
Category 5 or better, UTP or STP
Category 5e or better, UTP or STP
IEEE 802.3, IEEE 802.3u, IEEE 802.3x IEEE802.3ab
CSMA/CD
RJ-45
PCI 2.1, PCI 2.2, ACPI
LINK, ACT
4-pair, Category 5, Category 5 enhanced
10/100/1000 Mbps at Half duplex mode
20/200/2000 Mbps at Full duplex mode
120 mm x 22 mm X 120 mm (L x H x W)
55 g
0° to 40°C (32° to 107°F)
-40° to 70°C (-40° to 158°F)
20% to 95% relative humidity, non-condensing
20% to 95% relative humidity, non-condensing
FCC Class B, CE
8
Chapter 4 Specifications
Maximum Length
328 ft (100M)
328 ft (100M)
328 ft (100M)
Advertisement
Table of Contents
