Table of Contents
Advertisement
The default settings of the adapter should work in most cases. However, if you experience any unusual
circumstances during your installation, these settings may help you to trouble shoot the adapter. Do not
change any of these settings without a thorough understanding of the specifics of your network. The
following table briefly explains the function of each property.
Property
Auto-Negotiate capabilities
IEEE Compliance Enable
Interrupt Hold Off Time
Network Address
Link Speed
Wake Up Capabilities
Appendix A
Description
Auto negotiate LAN speed and duplex
Allow your PC to communicate with other
devices set to operate on the IEEE standard.
Specifies the time the adapter will wait for a
busy interrupt request.
Allow the user to configure the network
address of the adapter.
This option is use to control the card will use
fixed link speed to work or auto detect the
link speed to fit to the network environment.
Select one of the methods to let the card's
Wake-On-LAN function work.
10
Advanced Properties
Default Value
On
Auto
1(0-255)
Not Present
Auto
OS Controlled
Advertisement
Table of Contents
