Planet ADE-3110 User Manual page 47

l
The Gateway field of the static route entry allows users to either enter a Gateway IP
address or select a Network Interface.
l
All user-defined routes retained in the CPE memory, regardless if they are already in
the Routing Table, are displayed on the same Route Table page.
l
All user defined route entries kept in the CPE memory during run time are saved to
flash when the user chooses to save and reboot the CPE. When the CPE restarts, it
reloads all saved user-defined routes to the CPE memory and tries to apply to the
system.
l
A user-defined route entry is added to the Routing Table whenever the system pro-
vides an environment that makes the route entry applicable. It is removed from the
Routing Table whenever the route entry becomes not applicable. e.g. If the route
entry's Gateway is associated with a dynamic Network Interface but the connection
is not established, then the route entry does not appear in the Routing Table. When
that interface comes up later, the route entry is then added.
l
If the selected Network Interface is static or dynamic and the connection is already
up, then the route entry appears in the Routing Table immediately. If there is a
42