Virtual Server Configuration - Planet ADE-3110 User Manual

5.6 Virtual Server Configuration

The Virtual Server Configuration page allows you to set the configuration of the Virtual
Server. Virtual Servers are used for port forwarding from the WAN to LAN networks. All
UDP/TCP ports are protected from intrusion. If any specific local PCs need to be mapped
to the UDP/TCP port on WAN side, please input the mappings here. There can be up to
20 different Virtual Server Configurations.
ID: It is the ID number corresponding to the Virtual Server configuration.
Public Port - Start: It allows you to enter the port number of the Public Network (WAN or
external network). If you are entering a range of ports, this is the first port.
Public Port - End: It represents the last port number in a port range. If you only want one
port number (no port range), simply enter the same number here as in the Public Port -
Start field. The maximum number of the mapped Port is 20.
Private Port: It allows you to enter the port number of the Private Network (LAN or in-
ternal network). In most cases, the private port number is same as public port number.
This port number cannot be seen from the WAN side.
Host IP Address: It allows you to enter the private network IP address for the particular
33