Planet ADE-3110 User Manual page 17

ADSL Startup Attempts: It displays the number of ADSL connection attempts after loss
of showtime. A connection attempt is recorded only if showtime is attained.
ADSL Max TX Power: It displays the transmit output power level of the CPE (Customer
Premise Equipment), which is the transmit output power level of the Router.
ADSL CO Vendor: It displays the Central Office (CO) DSLAM vendor name, if available.
If the Router is not connected to an ADSL vendor, then 'UNUSED_VENDOR_0' will ap-
pear in this field.
Elapsed Time: It displays the time of the Router has been in operation. This is the
amount of time the Router is on, not the amount of time it is connected to the PC or in
showtime status.
A table contained the information of SNR Margin, Line Attenuation, Errored Seconds,
Loss of Signal, Loss of Frame, CRC Errors, Data Rate, and Latency is also available.
12