Nat Configuration - Planet ADE-3110 User Manual

If the PPP session is disconnected after the Disconnect Timeout, how can I re-
connect it?
Answer: You have to go to the PPP Status page, enter the correct connection number,
select the Connect option in the dropdown menu, and then click Execute. This will restart
the PPP secession.
What can I do to ensure an always-on connection with my PPP session?
Answer: There are two things you should do: 1) Make sure you have '0 'in the Discon-
nect Timeout field. This will make sure that the PPP session is not disconnected from
the user side. 2) Make sure the Automatic Reconnect box is checked. This will cause
the Router to automatically reconnect if the connection is severed from either the ISP
side or the user side.
Connect PPP when ADSL link is up Disabled
Disconnect Timeout
PPP Reconnect on WAN access
Automatic Reconnect
What is the difference between PPP Connect on WAN Access and the Automatic
Reconnect?
Answer: For the PPP connect on WAN access, the PPP will be automatically recon-
nected when an URL is entered in the browser (packet interested in going out the WAN).
For the Automatic Reconnect, it will reconnect the PPP session whenever it is terminated
by ISP.
5.5 NAT Configuration Pages
The NAT Configuration page allows you to set the configuration for the Network Ad-
dress Translation. The NAT module provides Dynamic Network Address and Port
Translation (Dynamic NAPT) capability between LAN and multiple WAN connections,
and the LAN traffic is routed to appropriate WAN connections based on the destination IP
addresses and the Route Table. This eliminates the need for the static NAT session con-
Action Manual PPP PPP Timeout
(Fee Based) (Fee Based)
Enabled
0 Set Timeout
Disabled Enabled
Disabled Disabled
30
PPP Always-on
Enabled
0
Disabled
Enabled