Switching The Telephone Muting/ Attenuation Setting; Formatting The "Memory Stick - Pioneer DEH-P900HDD Operation Manual

Initial Settings
S
witching the telephone
muting/attenuation setting
When a call is made or received using a cellular
phone connected to this product, the product
can be set to either mute or attenuate the audio
output.
1. With the source turned off, press and
hold 1.
2. Press MUTE.S to select the telephone
muting/attenuation mode.
3. Press MUTE.S to select the desired set-
ting.
Press MUTE.S repeatedly to switch between
the following settings:
TEL mute = 10dB ATT = 20dB ATT
Sound from this product is muted or attenu-
ated automatically when a call is made or
received using a connected cellular tele-
phone.
• "20dB ATT" has a stronger effect than
"10dB ATT", and "TEL mute" has a
stronger effect than "20dB ATT".
F
ormatting the "Memory Stick"
When this product can not read an inserted
"Memory Stick", the "Memory Stick" must be
formatted by this product. Formatting a
"Memory Stick" erases all data stored on it.
• If you format the "Memory Stick" using this
product, the remaining number of check out
allowed for the track you had been checking
out to the "Memory Stick" will not be not reset.
Please check in the tracks on the "Memory
Stick" to this product or a PC, then format
them on this product to reset the check out
number.
59
Note:
• When formatting, data other than that recorded
using this product will be erased. Always confirm
the contents of the "Memory Stick" before erasing.
• When purchasing a commercially available
"Memory Stick", it is already FAT-formatted, so fur-
ther formatting is unnecessary.
1. With the source turned off, press and
hold 1.
2. Press UTLTY to select the format mode.
3. Press OPEN to open the front panel.
4. Insert a "Memory Stick" into the MS load-
ing slot until it clicks into position.
MS loading slot
MS EJECT button
5. Close the front panel.
6. Press 5 to format a "Memory Stick".
The confirmation screen appears.
7. Press 2 and then press 5 to select "Y".
When formatting is completed, "Finished" is
displayed.
• If you press 3 3 and 5 to select "N", format-
ting will be terminated.