Using Compression And Dynamic Bass Emphasis; Using Its Memory - Pioneer DEH-P900HDD Operation Manual

Multi-CD Player
5. Press 3 3 to move the cursor to the next
character position.
• Press 2 to move backwards in the display.
6. Press 3 3 to move the cursor to the last
position and then press 3 3 one more time
after entering the title.
7. Press BAND to cancel the disc title input
mode.
Note:
• When playing a CD TEXT disc on a CD TEXT com-
patible multi-CD player, if you switch to this mode,
"No title input" is displayed and you cannot input
the title.
• Titles remain in memory even after the disc has
been removed from the magazine, and are recalled
when the disc is reinserted.
• After the titles for 100 discs have been entered, the
data for a new disc will overwrite the oldest one.
U
sing compression and dynamic
bass emphasis
Using the COMP (compression) and DBE
(dynamic bass emphasis) functions enables
multi-CD player sound quality adjustment. Each
of the functions enables two-step adjustment.
The COMP function adjusts imbalances
between loud and subdued sounds at higher
volumes.
DBE boosts bass levels to give a fuller sound.
1. Press FUNC and NEXT and then press
COMP to select the compression and
dynamic bass emphasis mode.
2. Press COMP to select the desired setting.
Press COMP repeatedly to switch between
the following settings:
COMP OFF = COMP 1 = COMP 2
= COMP OFF = DBE 1 = DBE 2
• When this mode is exited except for
"COMP OFF" is selected, "COMP" appears
on the basic display.
45
Note:
• If the multi-CD player does not support these func-
tions, "No COMP" is displayed when you attempt to
select it.
U
sing ITS memory
The ITS (instant track selection) lets you make
a program of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the ITS memory,
you can turn on ITS play and play just those
selections.
Programming tracks in ITS memory
You can use ITS to enter and play back up to
99 tracks per disc for up to 100 discs (with the
disc title). (With multi-CD players released
before the CDX-P1250 and CDX-P650, the
maximum number of programmable tracks is
24.)
1. Press 5 5 or ∞ ∞ to play the CD you want to
program.
2. Press FUNC and NEXT and then press
ITS.M to select the ITS memory mode.
3. Press 2 2 or 3 3 to select the desired track.
4. Press MEMO to store the currently play-
ing track in the ITS memory.
"Memory complete" is displayed briefly and
the currently playing track is added to ITS
memory.
5. Press BAND to cancel the ITS memory
mode.
Note:
• In this mode, you can also use 5 to store the cur-
rently playing track in the ITS memory.
• After 100 discs have been programmed, the data for
a new disc will overwrite the oldest one.