Setting The Fm Tuning Step; Setting The Am Tuning Step - Pioneer DEH-P900HDD Operation Manual

S
etting the FM tuning step
The FM tuning step during seek tuning can be
switched between 100 kHz (the factory preset
step) and 50 kHz.
1. With the source turned off, press and
hold 1.
2. Press NEXT and then press FMstep to
select the FM tuning step mode.
3. Press the corresponding button to select
the desired tuning step.
Button Tuning step
50K 50 kHz
100K 100 kHz
Note:
• If seek tuning is performed at 50 kHz steps, stations
may be tuned in imprecisely. Tune in the stations
with manual tuning or use seek tuning again.
S
etting the AM tuning step
The AM tuning step can be switched between 9
kHz and 10 kHz per step. Reset the AM tuning
step from 9 kHz (the factory preset step) to 10
kHz when using the tuner in North, Central or
South America.
1. With the source turned off, press and
hold 1.
2. Press NEXT and then press AMstep to
select the AM tuning step mode.
3. Press the corresponding button to select
the desired tuning step.
Button Tuning step
9K 9 kHz
10K 10 kHz
Note:
• If you switch the tuning step, the frequency range is
changed simultaneously.
60