Keypad Quick Guide - DSC PowerSeries PC1616 User Manual

Keypad Quick Guide

The following table summarizes the keys, indicators, and most often used commands of the keypad.
Ready - Must be on to arm system. All zones must be secured or bypassed and the
system disarmed for this light to activate.
Armed - Indicates system is armed. If the Ready light and the Armed light are both on
it indicates an Exit Delay is in progress.
Trouble - On indicates a system malfunction or tamper. Flashing indicates that the
keypad has a low battery condition. Follow the instructions displayed or enter [,][2] to
view trouble. The Trouble light will turn off when the trouble is corrected.
AC Power - Indicates AC Power is present. The AC Power light will turn off when AC
is absent.
Stay
Away
Chime
Reset
Exit
Language Selection - Press and hold both buttons simultaneously for 2 seconds to
activate. Scroll to the desired language. Press [,] to select choice.
Fire (F) - Press and hold this button for 2 seconds to activate.
Auxiliary (A) - Press and hold this button for 2 seconds to activate.
Panic (P) - Press and hold this button for 2 seconds to activate.
Press [ ] to select. Press [<][>] to scroll. Press [#] to exit.
,
PRESS... To ...
Bypass Zones
Press [0][0]
Press [9][9]
Press [9][5]
Press [9][1]
View System Troubles
View Alarms in Memory
Chime ON/OFF
Status Lights
Function Keys
Arms the system in Stay Mode.
Arms the system in Away Mode (default).
Same as pressing [,][4] on the keypad.
,
[
Same as pressing
Same as pressing [,][0] on the keypad.
Special Keys
User Commands
Clear Bypass
Bypass Recall
Save Bypass
Recall Save
Scroll to view all troubles
Scroll to view alarms
Turn chime on and off
19
][7][2]
on the keypad
These keys must be
programmed by the
installer to function.
.