Fireplace Installation - Dimplex DF3033ST Owner's Manual

Site Selection and Preparation
furniture and high traffic.
2. For ease of electrical hook
up you may wish to locate
the fireplace near an existing
outlet (refer to noTE 1).
3. Store the fireplace in a safe
dry and dust free location.
!
NOTE: The dimensions of
the fireplace are 31 ½ inches

Fireplace Installation

CAUTION:
air circulation beneath the
fireplace insert is provided by
two (2) rubber feet.
Do not install the fireplace
insert directly on carpet or
similar surfaces which may
restrict air circulation.
CAUTION:
fireplace in a carpeted area, place
a one-piece, solid, flat surface
under the fireplace insert. Ensure
that both of the insert's feet rest
securely on this surface.
Mantel Installation
Install the fireplace assembly
into the mantel (refer to mantel
assembly instructions).
!
IMPORTANT: If not using
8
Clearance for
If installing the
(800 mm) wide x 22 ⅜ inches
(568 mm) high x 9 ⅛ inches
(232 mm) deep. The fireplace
does not require any additional
venting.
Figure 1
9 ½"
(241 mm)
a Dimplex mantel, the fireplace
must be installed in an enclosure
with the following minimum
internal/opening dimensions
(Figure 1).
New Wall Construction
1. Select a suitable location that
22 ¾"
(578 mm)
31 ¾"
(807 mm)
www.dimplex.com