Maintenance - Dimplex ELECTRALOG DF203A Owner's Manual

Operation
the hand held transmitter
(Figure 9).
2. Correctly install one 12 Volt
(A23) battery in the battery
holder.
3. Close the battery cover.

Maintenance

WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least 5 minutes for light
bulbs to cool off before touching
bulbs to avoid accidental burning
of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame or when the clarity
and detail of the log exterior
disappears. there are two (2)
bulbs under the log set which
generate the flames and embers.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or retailer for recycling
advice in your area
to open the unit to replace light
bulbs.
Bulb Requirements
Quantity of 2 clear chandelier or
candelabra bulbs with an J-12
(small) socket base, 60 watt
rating. Example GE 60BC or
Philips 60 CtC.
To Replace The Light Bulbs
1. Unplug the unit from power
outlet.
2. on the back of the Compact
Fireplace remove the screws
from the light access cover
(Figure 11)
3. remove the light access
cover.
4. reach into the opening,
locate and examine the bulbs
to determine which bulb(s)
require replacement.
5. unscrew the bulb(s) counter
clockwise.
13