Volvo S60 Owner's Manual page 88

03 Your driving environment
Lighting
Posi- Specification
tion
Automatic dipped beam. Main
beam and main beam flash
work in this position
03 vated dipped beam.
Position/parking lamps
Dipped beam. Main beam and
main beam flash work in this
position.
A
Applies to certain markets.
Main beam flash
Move the stalk switch gently towards the steer-
ing wheel to the position for main beam flash.
Main beam comes on until the stalk switch is
released.
Dipped beam
When the engine is started, dipped beam is
2
activated automatically
trol is in position . If necessary, auto-
matic dipped beam for this position can be
deactivated by a workshop. Volvo recom-
mends that you contact an authorised Volvo
workshop.
2 Applies to certain markets.
*
88
Option/accessory, for more information, see Introduction.
In position
vated automatically when the engine is running
or when the remote control key is in position
II.
A Main beam
/Deacti-
Main beam can be activated when the head-
lamp control is in position
Activate/deactivate main beam by moving the
stalk switch towards the steering wheel to the
end position and release. Alternatively, the
main beam can be deactivated by a light press
of the stalk switch toward the steering wheel.
When main beam has been activated the sym-
bol
ment panel.
if the headlamp con-
dipped beam is always acti-
2
or
illuminates in the combined instru-
Active Xenon headlamps - ABL*
.
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
If the car is equipped with active Xenon head-
lamps (Active Bending Lights - ABL) the light
from the headlamps follows the steering wheel
movement in order to provide maximum light-
ing in bends and junctions and so provide
increased safety.
The function is activated automatically when
the car is started. In the event of a fault in the
function the symbol illuminates in the
combined instrument panel at the same time
as the information display shows an explana-
tory text and a further illuminated symbol.