04 Comfort and driving pleasure
Park assist camera*
Cars with reversing sensors*
04
Coloured areas (x 4, one per sensor) show dis-
tance.
If the car is also equipped with parking assis-
tance sensors (see page 203) the distance indi-
cation will be more precise and the coloured
areas show which of the 4 sensors is/are reg-
istering an obstacle.
The colour of the areas changes with decreas-
ing distance to the obstacle - from yellow to
orange to red.
*
208
Option/accessory, for more information, see Introduction.
Colour / paint
Distance
(metres)
Yellow
Orange
0.3–1.5
Red
Settings
Press OK/MENU when a camera view is
shown. Make the settings as desired.
Miscellaneous
•
The default setting is that the camera is
activated when reverse gear is engaged.
•
One press on CAM activates the camera
even if reverse gear is not engaged.
•
Change between normal and zoomed
image by turning TUNE or by pressing
CAM.
•
If the car has more cameras* installed then
the camera in use is changed by turning
TUNE.
Limitations
NOTE
1.5–
A bike carrier or other accessory mounted
on the rear of the car could obscure the
camera's view.
0–0.3
Pay attention to the possibility that, even if it
only looks like a relatively small part of the
image is obscured, it could be a relatively large
sector that is hidden from view. Obstacles
could thereby go undetected until they are very
close to the car.
To bear in mind
•
Keep the camera lens free from dirt, ice
and snow.
•
Clean the camera lens regularly with luke-
warm water and car shampoo - take care
not to scratch the lens.