Volvo S60 Owner's Manual page 231

Hide thumbs Also See for S60:
Table of Contents

Advertisement

Radio text
Some RDS stations transmit information on
programme content, artists, etc. This informa-
tion can be shown on the TV screen.
±
Activate/deactivate in FM mode under
menu
Show radio
text.
Automatic frequency update – AF
The function selects the strongest transmitter
for the set station. In order to find a strong
transmitter the function may, in exceptional
cases, need to search the entire FM wave-
length.
±
Activate/deactivate in FM mode under
menu
Advanced settings
Alternative
frequency.
Regional radio programmes – REG
This function causes the radio to continue with
a regional transmitter even if its signal strength
is low. The symbol
REG
shows that the func-
tion is active.
±
Activate/deactivate in FM mode under
menu
Advanced settings
Resetting RDS functions
All radio settings can be reset to the original
factory settings.
±
The reset is carried out in FM mode under
FM menu
Reset all FM
Volume control, programme types
FM
The interrupting programme types, e.g.
NEWS
or
TP
, are heard at the volume selected
for each respective programme type. If the vol-
ume level is adjusted during the programme
interruption, the new level is saved until the
next programme interruption.
Radio system - DAB*
FM
General
DAB (Digital Audio Broadcasting) is a digital
broadcasting system for radio.
NOTE
This system does not support DAB+.
NOTE
FM
Coverage for DAB is not available in all loca-
REG.
tions. If there is no coverage then the mes-
sage
No reception
screen.
Advanced settings
settings.
is shown in the display
*
Option/accessory, for more information, see Introduction.
05 Infotainment system
Service and Ensemble
Service - Channel, radio channel (only
audio services are supported by the sys-
tem).
Ensemble - A collection of radio channels
on the same frequency.
Storing channel groups (Ensemble learn)
When the vehicle is moved to a new broad-
casting area, programming of existing channel
groups in the area may be necessary.
Programming of channel groups creates an
updated list of all available channel groups.
The list is not updated automatically.
Programming is carried out in the menu system
in DAB mode under
DAB menu
learn. Programming can also take place as fol-
lows:
1. Turn TUNE one step in either direction.
>
Ensemble learn
is shown in the list of
available channel groups.
2. Press OK/MENU.
> New programming is started.
Programming can be cancelled with EXIT.
If can take up to a minute to program a channel
group if both
Band III
and
LBand
For more information on wavelength, see
page 233.
Radio
05
Ensemble
are selected.
``
231

Advertisement

Table of Contents
loading

Table of Contents