Key Positions - Volvo S60 Owner's Manual

03 Your driving environment

Key positions

Insert and remove the remote control
key
03
Ignition switch with remote control key extracted/
inserted.
NOTE
For cars with keyless function*, see
page 53.
Insert the key
Hold the end of the remote control key with the
detachable key blade and insert the key in the
ignition switch. Then press the key in the lock
up to its end position.
*
80
Option/accessory, for more information, see Introduction.
IMPORTANT
Foreign objects in the ignition switch may
jeopardise the function or destroy the lock.
Do not press the remote control key incor-
rectly turned - Hold the end with the detach-
able key blade, see page 48.
Withdraw the key
Push the remote control key, allow it to eject,
then pull it out.
Functions
The remote control key's 3 different key posi-
tions - 0, I and II - can be reached without the
need to start the engine. The table shows the
functions available in each key position.
NOTE
To reach key position I or II without starting
the engine - do not depress the brake/
clutch pedal when the following operations
are carried out.
Key position 0
Insert the remote control key in the ignition
switch and push it in to the end position.
Key position I
With the remote control key fully inserted into
the ignition switch - Briefly press START/
STOP ENGINE.
Key position II
With the remote control key fully inserted into
the ignition switch - Press START/STOP
ENGINE for about 2 seconds.
From key position II to I
With the remote control key fully inserted into
the ignition switch - Briefly press START/
STOP ENGINE.
Back to key position 0
To resume key position 0 from position I - Open
the driver's door.