Vivotek IP8361 User Manual page 82

VIVOTEK
Custom Command
If Custom Camera (scanner) is selected as the PTZ driver, you will need to configure command buttons
to control the PTZ scanner. Click Custom Command to open the Custom Command page to set the
commands in the Control Settings session. Please refer to your PTZ scanner user's manual to enter the
commands in the following fields. Click Save to enable the settings and click Close to exit the page.
►The command buttons will be displayed on the main page:
82 - User's Manual
NOTE:
►If you select DynaDome/SmartDOME, Lilin
PIH-7x00, Pelco D, Pelco P, or Samsung
scc643 protocol as the PTZ driver, the
C o n t r o l S e t t i n g s c o l u m n w i l l n o t b e
displayed.
►For all PTZ drivers, a total of five additional
command buttons can be configured.