Vivotek IP8361 User Manual page 147

Group: event_customtaskfile_i<0~2>
PARAMETER
name
date
time
Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
vi
VALUE SECURITY
(get/set)
string[41] 6/6
string[17] 6/6
string[17] 6/6
VALUE SECURITY
(get/set)
string[40] 6/6
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
boot, 6/6
di,
motion,
seq,
visignal,
recnotify,
tampering,
pir
String[40] 6/6
<integer> 6/6
<integer> 6/6
DESCRIPTION
Custom script identification of this entry.
Date of custom script.
Time of custom script.
DESCRIPTION
Identification of this entry.
Enable or disable this event.
Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
Delay in seconds before detecting the next event.
Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"pir" = PIR detection.
"recnotify" = Recording notification.
"audioswitch" = Audio switch.
"tampering" = Tamper detection.
"iva" = IVA trigger.
The status for event trigger
Indicate the source id of di trigger.
This field is required when trigger condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
Indicate the source id of vi trigger.
This field is required when trigger condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
VIVOTEK
User's Manual - 147