Vivotek IP8361 User Manual page 160

VIVOTEK
ePTZ Camera Control
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>][&auto=<value>][&zoom=<value>]
[&zooming=<value>&zs=<value>]
[&vx=<value>&vy=<value>&vs=<value>]
[&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=<value>]
[&return=<return page>]
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
move home
up
down
left
right
auto pan
patrol
stop
zoom wide
tele
zooming wide or tele
zs 0 ~ 6
vx <integer>
vy <integer>
vs 0 ~ 7
speedpan -5 ~ 5
speedtilt -5 ~ 5
speedzoom -5 ~ 5
speedapp 1 ~ 5
return <return page>
160 - User's Manual
DESCRIPTION
Channel of video source.
Stream.
Move to home ROI.
Move up.
Move down.
Move left.
Move right.
Auto pan.
Auto patrol.
Stop auto pan/patrol.
Zoom larger view with current speed.
Zoom further with current speed.
Zoom without stopping for larger view or further view with zs speed,
used for joystick control.
Set the speed of zooming, "0" means stop.
The direction of movement, used for joystick control.
Set the speed of movement, "0" means stop.
Set the pan speed.
Set the tilt speed.
Set the zoom speed.
Set the auto pan/patrol speed.
Redirect to the page <return page> after the parameter is assigned.