Vivotek IP8361 User Manual page 141

uartmode rs485,
rs232
uartreset <boolean>
customdrvcmd_i< string[128]
0~9>
speedlink_i<0~4> string[40]
_name
speedlink_i<0~4> string[128]
_cmd
updatecustomdrvc 1
md
updatespeedlinkc 1
md
ptzdriver 0~19,
127(custom)
,128(no
driver)
Group: snmp (capability.snmp) (product dependent)
NAME VALUE
v2 0~1
v3 0~1
secnamerw string[31]
secnamero string[31]
authpwrw string[8~128]
authpwro string[8~128]
authtyperw MD5,SHA
authtypero MD5,SHA
encryptpwrw string[8~128]
encryptpwro string[8~128]
encrypttyperw DES
encrypttypero DES
rwcommunity string[31]
rocommunity string[31]
syslocation string[128]
syscontact string[128]
2-2
4/4 RS485 or RS232.
4/4 Set the flag to true to apply change in UART
configuration.
1/4 PTZ command for custom camera.
1/4 Additional PTZ command name.
1/4 Additional PTZ command list.
7/4 Set this flag to true to apply change in custom command
configuration.
7/4 Set this flag to true to apply change in additional PTZ
command configuration.
4/4 The PTZ driver is used by this COM port.
SECURITY DESCRIPTION
(get/set)
6/6 SNMP v2 enabled. 0 for disable, 1 for enable
6/6 SNMP v3 enabled. 0 for disable, 1 for enable
6/6 Read/write security name
6/6 Read only security name
6/6 Read/write authentication password
6/6 Read only authentication password
6/6 Read/write authentication type
6/6 Read only authentication type
6/6 Read/write password
6/6 Read only password
6/6 Read/write encryption type
6/6 Read only encryption type
6/6 Read/write community
6/6 Ready only community
6/6 Description of Camera location (Ex. Address)
6/6 Description of Camera contactor (Ex. E-mail)
VIVOTEK
User's Manual - 141