Vivotek IP8361 User Manual page 140

VIVOTEK
patrolseq string[64]
patroldwelling string[128]
preset_i<0~(npre string[40]
set-1)>_name
preset_i<0~(npre 0~999
set-1)>_dwelling
uart 0 ~ (m-1), m
is UART count
cameraid 0~255
isptz 0 ~ 2
disablemdonptz <boolean>
Group: uart
(capability.uart>0)
NAME VALUE
ptzdrivers_i<0~1 string[40]
9,127>_name
ptzdrivers_i<0~1 string[128]
9,127>_location
enablehttptunnel <boolean>
Group: uart_i<0~(n-1)> n is uart port count
NAME VALUE
baudrate 110,300,600
,1200,2400,
3600,4800,7
200,9600,19
200,38400,5
7600,115200
databit 5,6,7,8
paritybit nne,odd,eve
n
stopbit 1,2
140 - User's Manual
1/4 (For external device)
The indexes of patrol points, separated by ","
1/4 (For external device)
The dwelling time of each patrol point, separated by ","
1/4 Name of the preset location.
1/4 The dwelling time of each preset location.
1/4 Select corresponding uart
(capability.nuart>0).
1/4 Camera ID controlling external PTZ camera.
1/4 0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
1/4 Disable motion detection on PTZ operation.
SECURITY DESCRIPTION
(get/set)
1/4 Name of the PTZ driver.
1/4 Full path of the PTZ driver.
4/4 Enable HTTP tunnel channel to control UART.
(capability.nuart>0)
SECURITY DESCRIPTION
(get/set)
4/4 Set baud rate of COM port.
4/4 Data bits in a character frame.
4/4 For error checking.
4/4 1,
2-1.5,data bit is 5