Media > Image - Vivotek PD8136 User Manual

VIVOTEK
Media > Image
Advanced Mode
This section explains how to configure the image settings of the Network Camera. It is
composed of the following four columns: General settings, Picture settings, Exposure, and
Privacy mask.
General settings
Video title
Show_timestamp_and video_title_in_video_and_snapshots: Enter a name that will be displayed on the
title bar of the live video as the picture shown below.
Video Title
2012/09/09 17:08:56
Title and Time
Video 17:08:56 2012/09/09
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
Video orientation: Flip - vertically reflect the display of the live video; Mirror - horizontally reflect the
display of the live video. Change the settings if the Network Camera is installed in a different orientation
to correct the image orientation. Please note that if you have preset locations, those locations will be
cleared after a change in the flip/mirror setting.
User's Manual - 41