Media > Image - Vivotek IP8371 User Manual

VIVOTEK
Media > Image
Advanced Mode
This section explains how to configure the image settings of the Network Camera. It is
composed of the following four columns: General settings, Picture settings, Exposure, and
Privacy mask.
General settings
Show timestamp and video title in video and snapshots:
Enter a name that will be displayed on the title bar of the live video as the picture shown below.
Video Title
2013/04/09 17:08:56
Title and Time
Video 17:08:56 2013/04/09
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate
image flickering associated with fluorescent lights. Note that after the power line frequency is
changed, you must disconnect and reconnect the power cord of the Network Camera in order for
the new setting to take effect.
Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the
display of the live video. Select both options if the Network Camera is installed upside-down (ex.
on the ceiling) to correct the image orientation. Please note that the preset locations will be cleared
after flip/mirror.
46 - User's Manual