Media > Image - Vivotek CC8160 User Manual

Media > Image
This section explains how to configure the image settings of the Network Camera. It is
composed of the following four columns: General settings, Picture settings, Exposure, Focus,
and Privacy mask. The Focus window is available only for models that come with motorized
lens.
General settings
Video title
Show_timestamp_and video_title_in_video_and_snapshots: Enter a name that will be displayed on the
title bar of the live video as the picture shown below. A zoom indicator will be displayed on the Home
page when you zoom in/out on the live viewing window as shown below. You may zoom in/out on the
image by scrolling the mouse wheel inside the live viewing window, and the maximum zoom in will be up
to 4 times.
Video Title
Title and Time
Video 17:08:56 2017/7/09
Zoom Factor
X2.1
Position of timestamp and video title on image: Select to display time stamp and video title on the top or
at the bottom of the video stream.
Timestamp and video title font size: Select the font size for the time stamp and title.
Video font (.ttf): You can select a True Type font file for the display of textual messages on video.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
2017/7/09 17:08:56
Zoom Out
Zoom In
VIVOTEK
User's Manual - 45