Add Media - Vivotek PD8136 User Manual

Add media

Add media
Click to open the media setting window. You can specify the type of media that will be sent
and preserved when a trigger is activated. A total of 5 media settings can be configured. There are three
choices of media types available: Snapshot, Video Clip, and System log. Select the item to display the
detailed configuration options. You can configure either one or all of them.
Media type - Snapshot
Select to send snapshots when a trigger is activated.
■ Media name: Enter a name for the media setting.
■ Source: Select to take snapshots from stream 1 ~ 2. (The following options are available when the
check circle is selected.
■ Send pre-event images
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Enter a number
to decide how many images to capture before a trigger is activated. Up to 7 images can be generated.
■ Send post-event images
Enter a number to decide how many images to capture after a trigger is activated. Up to 7 images can
be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15
images are generated after a trigger is activated.
1 pic. 2 pic.
■ File name prefix
Enter the text that will be appended to the front of the file name.
3 pic. 4 pic. 5 pic. 6 pic. 7 pic.
Trigger Activation
8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic.
VIVOTEK
14 pic. 15 pic.
User's Manual - 91