Viessmann VITOROND 200 Technical Data Manual page 9

Recommended Minimum Service Clearances
39½" / 19¾" /
500 mm
1000 mm
19¾" /
500 mm
Recommended Clearances to Combustibles
Boiler model VD2-
Top
Sides
Flue (oil)
Flue (gas)
Front
Floor
IMPORTANT
Maintain 1" air clearance from uninsulated
hot water pipes to combustible material.
IMPORTANT
Boiler must not be installed on carpet.
VITOROND 200, VD2
The combustion chamber door is factory assembled to hinge on the left-hand
side. A right-hand hinge is feasible by rebuilding the door hinge hardware.
c
Boiler model
c
d
Inch dimensions rounded to the nearest ¼".
Front clearances (dimension "c" above) will allow for easy removal of flue gas
turbulator inserts, as well as for full insertion of bristle brush for heat exchanger
d
cleaning.
8" / 200 mm
IMPORTANT
Minimum side clearance of 19¾" / 500 mm
must be maintained for side-mounted KR or
Dekamatik controls.
125
VD2-125 VD2-160
inches 47¼
mm 1200
inches Dependent on burner model
mm
160
Technical Data
VD2-195 VD2-230
53 59
1350 1500 1650
195 230
VD2-270
65 71
1800
270
6" / 150 mm
6" / 150 mm
9" / 229 mm
6" / 150 mm
6" / 150 mm
non-combustible
9