Checking The Flue Gas Header For Tightness; Checking The Mixer For Obstructions And Leaks; Instructing The System User - Viessmann VITOCROSSAL 200 Service Instructions Manual
Type ct2, gas fired condensing boiler with matrix cylinder burner for natural gas e and ll
Hide thumbs
Also See for VITOCROSSAL 200:
- Service instructions manual (96 pages) ,
- Service instructions for contractors (88 pages) ,
- Instructions manual (72 pages)
Table of Contents
Advertisement
Commissioning, inspection, maintenance
Further details regarding the individual steps
Checking the flue gas header for tightness
1. Visually inspect gasket A on the
flue gas collector. Traces of con-
densate on the outside of the flue
gas header indicate a leak.
Checking the mixer for obstructions and leaks
1. Remove the motorised lever from
the mixer handle.
2. Check the mixer for ease of opera-
tion.
Instructing the system user
The installer must instruct the user in
the operation of the system.
30
(cont.)
2. If required, retighten the gasket at
clamping clips B.
3. Check the mixer for leaks. Replace
the O-rings if the mixer leaks.
4. Snap the motorised lever into
place.
- Quick Links:
- Parts Lists
Hide quick links:
Advertisement
Table of Contents
