Wall mounting (only for type SH)
Installing the collectors
Installation information:
■ Gusset plate with circular hole at top
■ Gusset plate with slot at bottom
■ Secure the connection brace onto the
retaining brackets between the sec-
ond and third, the fourth and fifth
supports, etc. (see diagram below).
■ The side with the type plate must be
on the outside of the first and last col-
lector (see page 20).
Secure the pipework on only one col-
lector opposite the side with the type
plate.
■
!
Please note
Connection pipes should not
show any signs of damage.
Lubricate O-ring seals only
with the special valve grease
provided.
18
(cont.)