Installing The Collectors - Viessmann Vitosol-F Installation Instructions Manual

Installation with mounting brackets
Note for type SV
For snow loads of 4.80 kN/m
fitted; see diagram below.
7.
Fig. 19

Installing the collectors

Fig. 20
Installation information
■ The first and last collector must be positioned with
the type plate facing outwards (observe label).
■ On just one of the collectors, fit the pipework at the
side opposite the type plate side.
20
2
supporting rails must be
90 °
(cont.)
6.
Ø 8.5
!
Please note
The connection pipes must be free of any signs
of damage.
Only use the special grease provided to lubri-
cate the O-rings.