Applications Of Buss Record; Record By Mixing The Input Sound And Play Sound - Fostex VF-16 Owner's Manual

Applications of BUSS RECORD

BUSS RECORD makes it possible to record all the source channel signals sent to REC BUSS L/R on either 2 tracks
or 1 track. The source channel is selectable with the "INPUT" channel and "TRACK" channel, therefore, it is pos-
sible to record the input signals along with signals that are already recorded.

Record by mixing the input sound and play sound

Here, we will mix the play sounds of tracks 1-4 with the signals input through [INPUT] A-D to record on tracks
7 and 8.
Connecting the sound source
1. Connect the sound sources to record to [INPUT] A to D.
Preparations to record
1. Press the [INPUT SEL] key (ORANGE: Flashing).
The display to select "INPUT" - "TRACK" appears.
2. Press the [CH STATUS/CH SEL] key of ch9-ch12 so it
flashes ORANGE (ch9-ch12 -> "INPUT").
3. Press the [BUSS-SOURCE] key (GREEN: Flashing).
The display to select the source channel appears.
4. Press the [CH STATUS/CH SEL] key of ch1-ch4 and the
[CH STATUS/CH SEL] key of ch9-ch12.
Ch1-4 and ch9-12 are set to the source channel.
5. Press the [BUSS-REC TRK] key (RED: Flashing).
The display to select the REC track appears.
6. Press the [CH STATUS/CH SEL] key of ch7 and ch8.
Ch7 and ch8 are set as the REC track. The signals from
ch1-4 and ch9-12 can not be recorded to tracks 7 and 8.
7. Press the [EXIT/NO] key to return to the Normal Display.
8. Set the ch1-4, ch 7&8, and ch9-12 fader and master fader
to "0".
9. Press the [RECORD] key to go to the input monitor (RED:
Flashing).
Sound sources
INPUT A ~ D
INPUT
1/9/A 2/10/B 3/11/C 4/12/D 5/13/E 6/14/F 7/15/G
BAL UNBAL INSERT
TRIM
LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE
PEAK PEAK PEAK PEAK PEAK PEAK PEAK
1/9/A 2/10/B 3/11/C 4/12/D 5/13/E 6/14/F 7/15/G
CH STATUS ORANGE INPUT RED REC GREEN PLAY OFF
CH STATUS/CH SEL
+6 +6 +6 +6 +6 +6 +6 +6
0 0 0 0 0 0 0
-10 -10 -10 -10 -10 -10 -10 -10
-20 -20 -20 -20 -20 -20 -20 -20
-30 -30 -30 -30 -30 -30 -30 -30
-40 -40 -40 -40 -40 -40 -40 -40
- - - - - - - -
1 2 3 4 5 6 7
CH STATUS/CH SEL
+6 +6 +6 +6 +6 +6 +6 +6
0 0 0 0 0 0 0
-10 -10 -10 -10 -10 -10 -10 -10
-20 -20 -20 -20 -20 -20 -20 -20
-30 -30 -30 -30 -30 -30 -30 -30
-40 -40 -40 -40 -40 -40 -40 -40
- - - - - - - -
9 10 11 12 13 14 15
A B C D E F G
MON OUT PHONES
8/16/H L R
BAL UNBAL INSERT
MON OUT PHONES
DIGITAL
MIC 0 10 0 10
MULTITRACKER
PEAK
8/16/H
MUTE
SCENE
RECALL STORE
OPTICAL
D I R E C T R C L MAP
CLEAR
EFF EDIT
EFF1 EFF2
ACCESS
MUTE MUTE
PHANTOM
CH PARAM EDIT
EQ/COMP
0
EFF1/EFF2 HI-G/F/Q
PRE/POST COMP
REC ASSIGN
BUSS DIRECT
CH STATUS SOURCE REC TRK REC TRK DISP SEL PGM SEL
AUX1/AUX2 MID-G/F/Q
TIME BASE
AUTO RTN
PRE/POST
AUTO PUNCH CLIPBOARD
START IN OUT END IN ALIGN SEL OUT
PAN LO-G
1 2 3 4 5 6
MARK
FADER CH VIEW UNDO/ VARI
HOLD/ STORE EDIT REDO PITCH LOCATE
8
TRACK
P .EDIT LOC MEM
RECORD STOP PLAY REWIND
CLIPBOARD PLAY
AUTO PUNCH PREV
L O C AT E A B S 0
LOCATE REC END
+6
JOG
SHUTTLE
0 0
FADER
ADJUST EXIT/NO
-10
LEVEL EJECT
ADJUST
-20
ENTER/YES
-30
-40
SHIFT
-
16 TRACK
MASTER
H INPUT
10. Set the ch7/8 fader and PAN that is used to monitor the
REC track.
Set the ch7 PAN to the LEFT (L) and ch8 PAN to the RIGHT
(R). The position of the recorded signal can be checked.
11. Adjust the faders, PAN, equalizer and effect of each
source channel (ch1-4 and ch9-12).
The sound is recorded on track 7 by setting the source
channel PAN to the LEFT. The sound is recorded on track
8 by setting the source channel PAN to the RIGHT.
The sound is recorded on both tracks by setting the source
channel PAN to the CENTER.
When the preparations to record have been completed,
start recording according to the basic "BUSS RECORD"
instructions described earlier.
How to adjust the REC BUSS Master Level
To adjust the REC BUSS Master Level, press the [BUSS-REC
TRK] key then use the [JOG] dial while the following dis-
play is shown. The default setting of the REC BUSS Mas-
ter Level is set to "80". However, this can be modified to
a voluntary REC BUSS Master Level with the [JOG] dial.
After adjusting the level, press the [EXIT/NO] key.
The Normal Display appears. The master level during re-
cording appears on the level meter shown on the display
below.
70
Track 1
Track 2
Track 3
Track 4
Track 7
Track 8
SETUP
A RTN
A PLAY
7
SCENE SEQ.
SCRUB
F FWD
NEXT