Recorder Section; 00S - Fostex VF-16 Owner's Manual

Recorder Section

35
34
33
32
43
42
40
41
47
48
49
52
53
25. [INPUT SEL] Key
* Set whether to send the A to H input signals [INPUT]
or track 9-16 play [TRACK] sounds to the faders of
channel faders 9 to 16.
26. [REC ASSIGN-BUSS-SOURCE] Key
* Select the channel (SOURCE) to send to the REC BUSS
during "BUSS" recording. Select the SOURCE channel
with the [CH STATUS/CH SEL] key.
* This key lights ON when the SOURCE is selected.
27. [REC ASSIGN-BUSS-REC TRK] Key
* The track (READY) to record in "BUSS" recording is
selectable when this key is flashing. Set READY track
with the [CH STATUS/CH SEL] Key.
* This key lights ON when the READY track is set for
"BUSS" recording.
28. [REC ASSIGN-DIRECT-REC TRK] Key
* The track (READY) record in "DIRECT" recording is
selectable when this key is flashing. Set READY track
with the [CH STATUS/CH SEL] key.
* This key lights ON when the READY track is set for
"DIRECT" recording.
29. [DISP SEL/TIMEBASE] Key
* This key is used to alternate the menu shown on the
LCD in the following order.
* The tracks recorded vary, as shown below, according
to the connection jack.
25 26 27 28
REC ASSIGN
BUSS DIRECT
INPUT SEL SOURCE REC TRK REC TRK
AUTO RTN
AUTO PUNCH
START IN OUT END
1 2 3
MARK
UNDO/
HOLD/ STORE EDIT REDO
RECORD STOP
CLIPBOARD PLAY
AUTO PUNCH
L O C AT E A B S 0
LOCATE REC END
FADER
ADJUST EXIT/NO
54
EJECT
LEVEL
ADJUST
ENTER/YES
55
SHIFT
17
29 30 31
DISP SEL PGM SEL SETUP
T I M E B A S E
CLIPBOARD
A RTN
IN ALIGN SEL OUT A PLAY
4 5 6 7
S C E N E S E Q .
VARI
PITCH LOCATE SCRUB
P .EDIT EVT MEM
PLAY REWIND F FWD
PREV NEXT
JOG
SHUTTLE
a. Current location of TIME BASE selected
Shows the current location of the sound.
b. REMAINING TIME BASE Selected (time remaining)
Shows the time remaining and space available on the
disk for recordings (in terms of mono track).
c. MTC Time Input
Shows the MTC time input in the [MIDI IN] jack.
This is a convenience for operations as a slave device.
* The user can switch between time bases, as shown
below, by pressing the [DISP SEL/TIME BASE] key,
while the [SHIFT] key is depressed.
a. ABS (Absolute Time) Indication
An absolute time base from 00H 00M 00S (ABS 0) to
24H 00M 00S.
b. BAR/BEAT/CLK (Bar)
The "Bar, Beat, Clock" of the beat and tempo set with
the internal tempo map.
c. MTC (MIDI Time Code)
Display of the MTC time setting.
30. [PGM SEL] Key
* This is used to switch between programs 01 to 99.
This is also used to create new programs.
31. [SETUP] Key
* This is used to go into the setup mode to set various
parameters of the recorder and mixer.
36
37
38
39
44
45
46
51
50
56