Fader Fix Mode Setting; Fader Recall Mode Setting; Off - Fostex VF-16 Owner's Manual

Fader Fix Mode Setting ["Fader Fix"]
Whether the fader manipulation should be reflected on the sound volume or not can be set.
The setup content will be held even if the main power is switched off.
<Caution>
The "Fader Fix Mode" can be made to function when set
in other (CH, MST or CH & MST) than "Off" of the next
item on the "Fader Recall Mode".
• Initial setting:

[Off]

• Options: [On] or [Off]
* You can set the value for each Program individually.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the VF-16.
1. Select "Fader Fix" in the menu selection display and press
the [ENTER/YES] key.
The currently set will flash. "Off" will flash in the initial
setting.
Fader Recall Mode Setting ["Fader Recall"]
In the "Setup of the fader recall mode" menu, whether each channel input fader/master fader settings should
be recalled or not at scene recall, can be setup.
• Initial setting: [Off]
• Options: [Off], [CH], [MST] or [CH & MST]
* You can set the value for each Program individually.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the VF-16.
1. Select "Fader Recall" in the menu a selection display and
press the [ENTER/YES] key.
The currently set will flash. "Off" will flash in the
initial setting.
2. Select the desired item with the [JOG] dial and press
the [ENTER/YES] key.
The selected item will be set.
On
Off (Initial setting) Manipulation of the Channel fader/
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the
SETUP mode.
flashing
2. Input the desired item with the [JOG] dial and press
the [ENTER/YES] key.
The selected item will be set.
Off
(Initial setting)
CH (Channel)
MST (Master)
CH & MST
flashing
3. Press the [EXIT/NO] key (or [STOP] key) to exit from the
SETUP mode.
111
For all modes, manipulation of the
Channel fader/Master fader will
have not affect on the sound volume.
Any accidental shifting of the fader
position by vibration and
misoperation can be prevented.
Master fader will affect the sound
volume.
When scene is recalled, the fader
position immediately prior to
recalling the scene will be directly
employed without recalling the
setup figures of each channel fader
and the master fader.
When scene is recalled, setup figures
of each channel faders only will be
recalled and not recall the master
fader setup figure.
When scene is recalled, the setup
figure of the master fader only is
recalled and the channel fader setup
figures will not be recalled.
When scene is recalled, each
channel faders and the master fader
set up figures will both be recalled.