Remote Access; Before You Start; Access Uadm2 Admin Remotely - Toshiba Strata CIX GVPH Programming Manual

Voice processing system
Table of Contents

Advertisement

Remote Access

Remote access refers to accessing the UADM2 Admin software via modem from a portable or
desktop PC located at this or another site.To perform remote access, you must prepare the
GVPH system by installing and connecting the modem and preparing the portable/desktop
PC by configuring the modem.
UADM2 Admin software has three modes of accessing the GVPH remotely:
Auto Attendant via User ID 993
Direct Dialing Mode — the GVPH modem has a dedicated telephone line, enabling you to
dial into the number directly.
Manual Dialing Mode — the GVPH modem does not have a dedicated telephone line and
an operator must transfer the call to the modem number.
Manual dialing requires a standard telephone be connected to the UADM2 Admin
Note
PC modem.

Before You Start

It is recommended that you:
Make a copy of the Installation Disks as a backup copy and store them in a safe place.
Verify that voice processing is operational by making a test call into the system.

Access UADM2 Admin Remotely

1. From the DOS prompt (C:\Uadmin20), type: admin and press Enter. The UADM2
Admin screen displays.
2. Press Enter.The UADM2 Admin software prompts for the system password.
3. Type the password (the default is Stratagy) and press Enter.
If a modem is detected,
UADM2 Admin displays
the screen shown at right:
Direct Dialing Mode
!
Type the telephone number (50 digits maximum). Do not use dashes (e.g.,
9,7678989,,,,993). Press Enter .
Once the connection is made to the GVPH modem, a carrier tone is heard. The
UADM2 Admin synchs up to the modem. A message reading Connection established
appears briefly on the screen and the Main Menu displays.
Manual Dialing Mode
1. Press Enter to go to the Manual Dialing Mode screen.
2. Go off-hook on the standard telephone and dial the telephone number. Once
connection is made to the GVPH external modem, a carrier tone is heard.
3. Press Enter. UADM2 Admin synchs up to the modem. A message reading Connection
established appears briefly on the screen and the Main Menu displays.
Strata CIX40 Voice Processing Programming Manual
7/06
Access and Use UADM2 Admin
Remote Access
1-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents