Test Smdi; Smdi Calling Party Identification - Toshiba Strata CIX GVPH Programming Manual

Test SMDI

After the SMDI feature has been enabled in GVPH and the link has been established with the
backplane, the SMDI link can be tested.
Initial testing can be done by making test calls into GVPH. Program a User ID with default
options. Use the default System Greeting and default System Busy greetings for the mailbox.
1. Make a call into GVPH from an extension that is the same number as the User ID.
GVPH receives a Direct Call packet and prompts "Please enter your security code."
If the system plays the Company Greeting, then the CIX40 is not programmed
Note
properly. Recheck the programming.
2. Call forward a telephone All Calls. From another extension, call the forwarded
telephone. The System Greeting for the mailbox plays.
Notes
1 If the system plays the Company Greeting, then the CIX40 programmed properly.
Recheck the programming.
2 CIX40/GVPH is programmed for plug and play operation. The VMID matched the
station PDN by default.
3. Call forward a telephone for Busy. Make the extension busy, then call the busy
extension from another telephone. The System Busy Greeting plays.
If the system plays the Company Greeting, then the CIX40 programmed properly.
Note
Recheck the programming.
4. If Steps 1, 2 and 3 were successful, make another call from an internal extension (that
has a User ID assigned on the system) to the forwarded extension, and leave a
message.
5. Log on to the User ID that has the message. The header information for the message
should include the User ID number of the extension that left the message.
Play the message. If these tests are successful, the SMDI integration is working
properly. If these tests fail, then the CIX40 programming is incorrect.

SMDI Calling Party Identification

The Strata CIX telephone system provides the GVPH with incoming Calling Party ID via SMDI
integration. Data messages or packets are sent into the system to provide information
concerning the type of call and the calling party ID.
When configuring the GVPH for SMDI, make sure both the GVPH and the
Note
telephone system are configured concurrently. If the telephone system is
configured for a 10-digit Calling Party ID, the GVPH must also have the proper 10-
digit integration patterns in the System Integration Patterns screen. Also make sure
the correct notification template has been selected in the User ID Notify screen.
The GVPH default is 10-digit Calling Party ID.
See "SMDI Integration" on page 1-21
token use.
Some examples of the available applications are adding the Calling Party ID to the message
header, playing a specific greeting and routing a call based on the telephone number
received.
Calling Party ID in Message Header
Strata CIX40 Voice Processing Programming Manual
for detailed information on SMDI, caller ID, and
7/06
Configure UADM2 Software
SMDI Integration
%K
2-23