Access and Use UADM2 Admin
Access UADM2 Admin
Access UADM2 Admin
There are two ways to access the UADM2 Admin program: local and remote.
Method
Local
Remote
Local Access
Local access refers to accessing the UADM2 Admin program via a cable connecting the
GVPH with a portable or desktop PC. To perform local access, you must connect the local
system to the GVPH each time you access UADM2 Admin locally.
Before You Start
It is recommended that you:
•
Make a backup copy of the installation disks and store them in a safe place.
•
Verify that GVPH voice processing is operational by making a test call into the system.
Only UADM2 Admin can be used with the GVPH voice processing system.
Note
Access UADM2 Admin Locally
1. From the DOS prompt (C:\Uadmin20), type: admin and press Enter. The UADM2
Admin screen displays.
2. Press Enter.The UADM2 Admin software prompts for the system password.
3. Type the password (the default is Stratagy) and press Enter.
If a modem is not detected, UADM2 Admin establishes a direct connection (local
access).
1-2
Description
Access UADM2 Admin via a cable
connecting the GVPH with a portable
or desktop PC.
Access UADM2 Admin via a modem
from a PC located at this or another
site.
Requirements
•
Customer-supplied portable/desktop PC
•
UADM2 Admin software
•
Customer-supplied UADM2 Admin Cable
(see Strata CIX40 I&M for GVPH PC
connections)
•
UADM2 Admin software
•
Built-in modem (AMDS)
•
Customer-supplied external modem for
GVPH
Strata CIX40 Voice Processing Programming Manual
7/06