Speco CS Series Manual page 8

POS Manual
- COM1 and COM 2 is for the POS/printer
- Connection between the DVR and USB-Serial convertor can be done by USB cable.
Connecting 16 x POS devices to the DVR using network...
NOTE: Default port number from LAN1 to LAN16 for DVR LAN Text-in setting is set from 14001
to 14016 respectively.
NOTE: When connecting POS devices to the DVR via network, IP address of DVR and port
number of LAN Text-in should be registered in POS for text-in transmission.
4