Transmission Control Switch; Accelerating With The Speed Control Operating; Resetting The Speed Control - Ford Ranger Owner's Manual

Transmission control switch

Accelerating With the Speed Control Operating

You can use the accelerator pedal to speed up momentarily.
When you take your foot off the accelerator, the vehicle will
return to the set speed.

Resetting the Speed Control

To reset the speed control to a lower speed, press and hold the
COAST switch. Let your vehicle slow down to the desired
speed and release the COAST switch.
Your vehicle has a "tap-down" feature that allows you to
decrease your current speed in increments of 1 mph (1.6 km/h)
by a momentary tap of the COAST switch. Multiple taps of the
COAST switch will decrease your vehicle speed 1 mph
(1.6 km/h) for each tap. For example, if you are currently set at
65 mph (104 km/h) and tap the COAST switch 5 times your
vehicle speed will decrease and set at 60 mph (96 km/h).
To reset the speed control to a higher speed, you can follow
any of these procedures:
Accelerate to the desired speed, then press the SET ACCEL
switch and release it immediately.
Press and hold the SET ACCEL switch, then accelerate to
your desired speed and release the switch.
96