How To Eject The Tape; How To Switch From Tape To Am/Fm Mode; Using The Dolby B Noise Reduction Feature - Ford Ranger Owner's Manual

Using the "SEEK" function with your cassette tape player
While in the tape mode, push the right ( a ) side of the
"SEEK" button to seek forward to the next selection on the
tape. Push the left ( b ) side to seek the previous tape
selection.
Using the "SCAN" function with your cassette tape player
Press the "SCAN" button to begin the forward scan mode on
the tape currently playing, stopping on each tape selection
for approximately an eight-second sampling (display
indicates "SC").
To stop the scan mode on the presently sampled tape
selection, press "SCAN" a second time.
How to change the side of the tape being played
The alternate side of the tape can be selected by pressing the
"SIDE 1-2" button.

How to eject the tape

To stop the tape and eject the cassette, press the "EJ" button.
The radio will resume playing if the radio power is on. The
tape cartridge can be ejected with radio power (and/or ignition)
on or off.

How to switch from tape to AM/FM mode

Press the "AM/FM" button to stop the tape player and resume
radio play.

Using the Dolby B noise reduction feature

NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation. "Dolby" and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Push the k button to activate Dolby B Noise Reduction. Push
again to deactivate.
134