Using The Controls Of Your Cassette Tape Player; How To Insert A Tape; How To Locate A Desired Track On The Tape - Ford Ranger Owner's Manual

Using the Controls of Your Cassette Tape Player

NOTE: Radio power must be on to use the cassette tape
player.

How to insert a tape

Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with the open edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process. Display indicates "TAPE" while tape is playing.
NOTE: A cassette tape can be loaded with the ignition on
whether or not the radio power is on. However, with
radio power off, the cassette tape is loaded and stored.

How to locate a desired track on the tape

There are four ways to quickly locate a desired selection on the
tape. You can use the fast forward, rewind, "SEEK" or "SCAN"
function. Following are brief descriptions of each.
Fast forwarding the tape
To fast forward the tape, press the "FF" button. The radio
will begin playing until fast forward is manually stopped (by
pushing the "TAPE" button) or the end of the tape is
reached.
At the end of the tape, the direction automatically reverses
and plays the other side of the tape.
Rewinding the tape
To rewind the tape, press the "REW" button. The radio will
begin playing until rewind is manually stopped (by pushing
the "TAPE" button) or the beginning of the tape is reached.
Electronic Sound Systems
133